Splash Ring
- reduces splashback and material redeposition
- directs expelled material downward into the process bowl
- helps prevent redeposited material on the substrate
- drop-in installation on Apogee® 200 equipment
- compatible with Cee® bowl liners
Product Information
Overview
The Cee® Splash Ring is designed to reduce splashback during spin coating. As process material is expelled from a rotating substrate, the ring’s angled surface directs it downward into the process bowl, helping minimize material redeposition on the substrate. This can be especially useful with larger substrates or high liquid volumes.
Key Capabilities
- reduces splashback and helps minimize material redeposition
- angled surface directs expelled material downward into the process bowl
- compatible with Cee® bowl liners
- separate designs to fit Apogee® 200 and 450 process bowls
On Apogee® 200 equipment, the splash ring seats on the bowl’s upper edge. On Apogee® 450 equipment, adjustable support legs set the height and the set screw must be aligned over the bowl drain. Verify that the ring is fully seated and does not interfere with lid closure before operating.
Compatibility
Available for Apogee® 200 and 450 Spin Coaters and Spin Developers. Splash Rings are an optional accessory for spin coating applications and standard on Apogee® Spin Developer equipment. They can be used together with Cee® bowl liners.
What's in the Box
- Splash Ring
- Installation/Operations Manual
Specs
HDPE (high-density polyethylene)
Diameter: 11.5″ (292mm)
Height: 1.75″ (44mm)
Diameter: 23.75″ (603.25mm)
Height: 4.875″ (123.8mm)
You May Also Like