AccuScan™ Spray Dispense

Precisely position and scan a fan spray for demanding developing and cleaning processes, including metal liftoff and high aspect ratio applications. AccuScan™ gives you recipe control over where the spray lands, how it moves, and when it dispenses.

  • 0.1 mm position resolution and 0–50 mm/s scan speed
  • Scanning, fixed-position, and off-wafer pre-dispense
  • Up to two spray dispenses plus N₂ blow-off
  • Pressure can or regulated House Source supply with ¼″ liquid lines and valves
  • Drip-free park position

Requires a dispense control box, sold separately. One box supports up to four dispenses. Need more than four? Add dispense control boxes to expand your system.

Select your configuration.

All configurations use a ¼″ liquid line and valve with AccuScan™ fan-spray delivery. The AccuScan™ arm and dispense control box are ordered separately.

Product Information

More Control Over Developing and Cleaning

The AccuScan™ arm moves fan-spray delivery across the wafer under DataStream™ recipe control. Set the spray position and movement for the process, hold a selected location, or pre-dispense off the wafer before bringing fresh liquid onto the substrate.

Controlled impingement and targeted delivery support residue removal, surface wetting, metal liftoff, and other demanding cleaning applications. Tune the chemistry, flow, scan motion, timing, and spin conditions together for the substrate.


A Coordinated Wet and Dry Sequence

The developer arrangement accommodates up to two liquid dispenses plus N₂ blow-off. Combine the selected spray steps with a drying step in one recipe. The arm parks clear of the wafer between uses, helping manage residual liquid at the nozzle.


Spray Supply for Apogee® Developers

Choose a 1–10 gallon pressure can or a compatible pressurized House Source, such as DI water. Both use a ¼″ liquid line and valve. House Source liquid must be customer-regulated to 29 psi or less at the equipment. Pressure cans are available in standard stainless-steel or PFA-coated finishes and include empty-reservoir float sensing through DataStream™. The dispense control box is required for automated pneumatic delivery and is ordered separately.

Choose the Material Source

Select a pressure can for a local reservoir, or House Source for a compatible customer-supplied pressurized liquid line, such as DI water. The House Source SKU is HS-2-ASDS. Both supply choices use a ¼″ line and valve.

House Source requirement: Liquid must arrive pressurized at the equipment and be customer-regulated to 29 psi or less. The customer provides the compatible liquid source, pressure regulation, and facility-side connection.

Pressure can option:

Select a 1, 2, 3, 5, or 10 gallon pressure can and either standard stainless steel or PFA-coated construction. Every option shown here uses a ¼″ liquid line and valve. PCBE identifies a standard vessel, PCBTE identifies a PFA-coated vessel, and the ASDS suffix identifies AccuScan™ spray delivery.

X-Pro pressure can storage: 1- and 2-gallon pressure cans fit inside the X-Pro in the designated storage area. Pressure cans larger than 2 gallons must be located outside the X-Pro.

For example: PCBE-1-2-ASDS. The displayed SKU identifies the pressure-can spray supply. Specify the AccuScan™ arm and compatible developer installation separately.


Plan the Spray and Drying Sequence

Confirm the Apogee® developer model, substrate geometry, chemistry, scan positions, speed, and number of liquids. Allow space for the arm and access to the reservoir lid. If the process includes gas drying on the arm, select N-1-AS on the N₂ Blow-Off Dispense page.

AccuScan™ Arm Assembly

  • Factory-mounted AccuScan™ arm
  • Spray nozzles and assorted tips for the configured developer arrangement

Configured Spray Supply

The spray supply is ordered separately from the arm. Each selected spray supply includes the following; the reservoir and float sensor apply only to the pressure can option:

  • Pressure can option only: Pressure canister with lid, dip tube, closure seal, and installed empty-reservoir float sensor, in the selected capacity and finish
  • 6 ft of ¼″ PTFE liquid dispense tubing
  • 6 ft of green ⅛″ pneumatic control tubing with sleeve valve
  • ¼″ dispense valve with flow and suckback adjustment and connection tubing
  • AccuScan™-compatible spray delivery connection

Purchased separately: The dispense control box and any N₂ blow-off dispense.

House Source option: Includes the ¼″ dispense valve, 6 ft of ¼″ PTFE liquid tubing, 6 ft of green ⅛″ pneumatic trigger tubing with sleeve valve, and AccuScan™-compatible spray delivery connection. No pressure can or float sensor is included. The customer supplies the compatible pressurized liquid source, regulated to 29 psi or less at the equipment, and the facility-side connection.

Position Resolution

0.1 mm

Scan Speed

0–50 mm/s

Dispenses

Up to two liquid dispenses plus N₂ blow-off

Liquid Line & Valve

¼″

Fluid Viscosity

Up to 100 cps

Reservoir Finish

Pressure can option: standard stainless steel or PFA-coated. House Source: customer-supplied liquid line.

Dimensions

Added Rear Clearance

9″ (228.6 mm) beyond standard equipment depth

Added Height

2″ (50.8 mm) above standard equipment height

Reservoir Capacity

Pressure can option: 1, 2, 3, 5, or 10 gallons. House Source: no local reservoir.

Reservoir dimensions below apply to the pressure can option only. House Source has no local reservoir. Allow access to the pressure can lid and connections when that option is selected.

Reservoir Size

1 gallon

Height

11.5″ (29.2 cm)

Diameter

10″ (25.4 cm)

Reservoir Size

2 gallons

Height

14.5″ (36.8 cm)

Diameter

10″ (25.4 cm)

Reservoir Size

3 gallons

Height

18″ (45.7 cm)

Diameter

10″ (25.4 cm)

Reservoir Size

5 gallons

Height

25″ (63.5 cm)

Diameter

10″ (25.4 cm)

Reservoir Size

10 gallons

Height

28″ (71.1 cm)

Diameter

13″ (33.0 cm)

Allow at least 12″ (30.5 cm) above the reservoir for access to the lid and top components.

Utilities

Gas Supply

Nitrogen or clean dry air

Supply Pressure

Pneumatic supply: 70 psi to the dispense control box.

House Source liquid supply: Customer-regulated to 29 psi or less at the equipment.

Reservoir Monitoring

Pressure can option: DataStream empty-reservoir float sensor. House Source: customer-managed supply.

You May Also Like

Need a custom dispense solution?

Need heated dispensing, a special delivery method, or a configuration you don’t see here? Cee® offers custom solutions built around your material, equipment, and process.

See examples of our custom equipment, then contact Cee® to discuss your dispense requirements.