Fixed Spray Dispense

Deliver fresh process liquid across the wafer with a fixed flat-fan spray. Pressure can or regulated House Source supply, adjustable nozzle position, and recipe-controlled timing make it a practical choice for repeatable developing and cleaning.

  • ¼″ liquid line and dispense valve
  • Pressure can or regulated House Source supply
  • 1–10 gallon standard stainless-steel or PFA-coated pressure cans
  • Adjustable flow and suckback

Requires a dispense control box, sold separately. One box supports up to four dispenses. Need more than four? Add dispense control boxes to expand your system.

Select your configuration.

All configurations use a ¼″ liquid line and valve with fixed fan-spray delivery.

Product Information

Overview

A fixed fan-spray nozzle spreads fresh chemistry across the processing surface while the wafer spins. Set the nozzle position and fan coverage for the substrate, then coordinate liquid delivery with the developing or cleaning recipe.


Key Capabilities

Choose 110° or 40° fan coverage to suit the application. Multi-axis nozzle adjustment, dispense-flow adjustment, and suckback control help match coverage and the start and stop of delivery to the process.

Choose a local pressure can or a compatible pressurized House Source, such as DI water. House Source liquid must be customer-regulated to 29 psi or less at the equipment. Pressure can configurations include an installed float sensor for empty-reservoir monitoring through DataStream™.


Equipment Compatibility

Designed for Apogee® spin developers configured for spray dispensing. A dispense control box supplies automated pressure and valve control and is sold separately.

Choose the Material Source

Select a pressure can for a local reservoir, or House Source for a compatible customer-supplied pressurized liquid line, such as DI water. The House Source SKU is HS-2-DS. Both supply choices use a ¼″ line and valve.

House Source requirement: Liquid must arrive pressurized at the equipment and be customer-regulated to 29 psi or less. The customer provides the compatible liquid source, pressure regulation, and facility-side connection.

Pressure can option:

Choose 1, 2, 3, 5, or 10 gallons around material consumption, refill frequency, and shelf life. Select standard stainless steel or a PFA-coated vessel to suit the chemistry, and confirm compatibility across the complete wetted path.

X-Pro pressure can storage: 1- and 2-gallon pressure cans fit inside the X-Pro in the designated storage area. Pressure cans larger than 2 gallons must be located outside the X-Pro.

Every fixed-spray option uses a ¼″ liquid line and valve. Standard vessels use PCBE and PFA-coated vessels use PCBTE; the line code is 2 and the spray suffix is DS. For example: PCBE-1-2-DS.


Match Coverage and Process Timing

Specify the Apogee® developer model, substrate size, chemistry, and required coverage. Match the fan angle, nozzle position, flow, suckback, and recipe timing to the process. For recipe-controlled moving spray coverage, explore AccuScan™ Spray Dispense.

  • Pressure can option only: Pressure canister with lid, dip tube, closure seal, and installed empty-reservoir float sensor, in the selected capacity and finish
  • 6 ft of ¼″ PTFE liquid dispense tubing
  • 6 ft of green ⅛″ pneumatic control tubing with sleeve valve
  • ¼″ dispense valve with flow and suckback adjustment and connection tubing
  • Fixed fan-spray nozzle and mounting connection matched to the developer

For the pressure can option, the float sensor is assembled onto the pressure can for supply monitoring through DataStream™.

Purchased separately: The dispense control box.

House Source option: Includes the ¼″ dispense valve, 6 ft of ¼″ PTFE liquid tubing, 6 ft of green ⅛″ pneumatic trigger tubing with sleeve valve, and fixed fan-spray nozzle and mounting connection. No pressure can or float sensor is included. The customer supplies the compatible pressurized liquid source, regulated to 29 psi or less at the equipment, and the facility-side connection.

Spray Pattern

Flat fan; 110° or 40°

Liquid Line & Valve

¼″

Fluid Viscosity

1–100 cps

Reservoir Capacity

Pressure can option: 1, 2, 3, 5, or 10 gallons. House Source: no local reservoir.

Vessel Finish

Pressure can option: standard stainless steel or PFA-coated. House Source: customer-supplied liquid line.

Wetted Materials

PFA, PTFE, 304/316 stainless steel

Dimensions

Reservoir dimensions below apply to the pressure can option only. House Source has no local reservoir. Allow access to the pressure can lid and connections when that option is selected.

Reservoir Size

1 gallon

Height

11.5″ (29.2 cm)

Diameter

10″ (25.4 cm)

Reservoir Size

2 gallons

Height

14.5″ (36.8 cm)

Diameter

10″ (25.4 cm)

Reservoir Size

3 gallons

Height

18″ (45.7 cm)

Diameter

10″ (25.4 cm)

Reservoir Size

5 gallons

Height

25″ (63.5 cm)

Diameter

10″ (25.4 cm)

Reservoir Size

10 gallons

Height

28″ (71.1 cm)

Diameter

13″ (33.0 cm)

Allow at least 12″ (30.5 cm) above the reservoir for access to the lid and top components.

Utilities

Gas Supply

Nitrogen or clean dry air

Supply Pressure

Pneumatic supply: 70 psi to the dispense control box.

House Source liquid supply: Customer-regulated to 29 psi or less at the equipment.

Reservoir Monitoring

Pressure can option: DataStream empty-reservoir float sensor. House Source: customer-managed supply.

You May Also Like

Need a custom dispense solution?

Need heated dispensing, a special delivery method, or a configuration you don’t see here? Cee® offers custom solutions built around your material, equipment, and process.

See examples of our custom equipment, then contact Cee® to discuss your dispense requirements.